LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Engine Control System - 2.0L GDI) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the surge tank.

    Intake Air Temperature Sensor Mounting Bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    Fig 1: Disconnecting Manifold Absolute Pressure Sensor Connector
    G12162406Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals