LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Fuel Delivery System - 2.0L GDI) >> Fuel Line >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF, and then remove battery (-) terminal.
  2. Release the Residual Pressure In Fuel Line.

    (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the low pressure fuel quick-connector (A).
    Fig 1: Low Pressure Fuel Quick-Connector
    G12162588Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the vapor hose (A) which is connected from the PCSV.
    Fig 2: Vapor Hose From PCSV
    G12162589Courtesy of KIA MOTORS AMERICA, INC.
  5. Lift the vehicle.
  6. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  7. Remove the center muffler assembly.

    (Refer to Engine Mechanical System - "MUFFLER ")

  8. Remove the fuel line fixing clip mounting bolt (A).
    Fig 3: Fuel Line Fixing Clip Mounting Bolt
    G12162590Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the heat protector (A) after loosening the mounting nuts.
    Fig 4: Removing Heat Protector
    G12162591Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove the fuel line (A).
Fig 5: Removing Fuel Line
G12162592Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals