Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.

Release the residual pressure in fuel line.
(Refer to Fuel Delivery system - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
Remove the rear seat cushion.
(Refer to Body - "REAR SEAT ASSEMBLY ")
Remove the fuel pump service cover (A).

Fig 1: Removing Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel pressure sensor connector (A).

Fig 2: Disconnecting Fuel Pressure Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pressure sensor fixing pin (A).
Remove the fuel pressure sensor (B) from the fuel pump.

Fig 3: Removing Fuel Pressure Sensor Fixing Pin

Courtesy of KIA MOTORS AMERICA, INC.