LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Blind Spot Detection System (BSD)) >> Blind Spot Detection Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE:
    • The shapes of the LH and RH blind-spot detection (BSD) units are different. Therefore, take notice when installing the BSD units.
    • After the replacement of BSD unit or bracket or wire, perform the radar calibration procedures. (If do not calibrate the sensor angle, it can cause the malfunction of BSD system.)

    (Refer to Blind Spot Detection system - "BLIND SPOT DETECTION RADAR CALIBRATION ")
scientia non olet · About LEMON Manuals