Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

Connect KDS and select "Diagnostic Trouble Codes (DTCs)" mode
Using KDS, Clear DTC.
Operate the vehicle within DTC Enable conditions in General information.
Are any DTCs present?
YES
- Go to the applicable DTC INDEX procedure.
NO
- System performing to specification at this time.