LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Clutch System) >> Concentric Slave Cylinder Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle assembly.

    (Refer to Manual Transaxle System - "MANUAL TRANSAXLE ")

  2. Remove the concentric slave cylinder assembly from the transaxle case by removing bolts (A).

    Tightening Torque: 

    19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 lb.ft)

    Fig 1: Locating Concentric Slave Cylinder Assembly Bolts
    G12161559Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals