LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (4 Of 6) >> DTC P0521-00: Engine Oil Pressure Sensor/Switch Range/Performance >> Component Inspection >> Check Resistance Of Oil Pressure Control Valve

Check Resistance Of Oil Pressure Control Valve

  1. Ignition "OFF".
  2. Disconnect the Oil Pressure Solenoid Valve connector.
  3. Measure voltage between Pin No. 1 (Fuse-SENSOR2) and Pin No. 2 (Control) terminal of Oil Pressure Solenoid Valve. (Component Side)

    Specification:  22.0 to 26.0Ω (20°C (68°F))

  4. Is the measured value within specification?

    YES 

    NO 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems were found with the circuits or connectors, replace the Oil Pressure Solenoid Valve and go to "Verification Of REPAIR " procedure.
scientia non olet · About LEMON Manuals