LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (4 Of 6) >> DTC P0463-00: Fuel Level Sensor 'A' Circuit High Input >> Wiring Inspection >> Fuel Sender (+) Input Inspection >> Check Open In Harness

Check Open In Harness

  1. Ignition "OFF" & Disconnect FPCM and CLU connector.
  2. Measure resistance between Pin No. 6 (+) terminal of FPCM harness connector and Pin No. 14 (Fuel Sender (+) Input) terminal of CLU harness connector.

    Specification:  Approx. 1Ω below

  3. Is the measured resistance within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals