LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 6) >> DTC P0315-00: Crankshaft Position System Variation Not Learned >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Monitor learning of crank shaft reluctor tooth
  1. CKPS connection
  2. Condition of the target wheel
  3. ECM
Enable Conditions
  • Engine load ratio higher than 10% and lower than 90%
  • Engine speed higher than 1500RPM and lower than 4000RPM)
  • Coolant temperature is higher than 0°C (32°F) and lower than 110°C (230°F)
Threshold Value
  • Driving more than 4000km (2485mile) without learning tooth deflection
Diagnostic Time
  • -
MIL ON Condition
  • Only express DTC (MIL "OFF")
scientia non olet · About LEMON Manuals