LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P0880-00: TCM Power Input Signal >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage Monitoring
  1. Poor Connector Connection
  2. Faulty TCM Power Circuit
  3. Faulty TCM
Enable Conditions
  • Ignition "ON" voltage is more than 10V
  • Engine Speed higher than 400RPM
Threshold value
  • Actuator Power Supply Voltage higher than 22V or Lower than 7V
Fail safe
  • 5th Gear Hold, Learning is prohibited
Detecting Time
  • First Event
MIL ON Condition
  • 2 Driving Cycles
scientia non olet · About LEMON Manuals