LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (6 Of 6) >> DTC P2540-00: Low Pressure Fuel System Sensor Circuit Range/Performance >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Fuel pressure sensor signal voltage check
  1. Poor Connector Connection
  2. Fuel Rail Pressure Sensor
Enable Conditions
  • Engine running
  • Battery voltage higher than 11V
  • Target fuel pressure higher than 250kPa and lower than 600kPa
Threshold value
  • The change in the fuel pressure sensor voltage more than 120kPa for 5ms
Diagnosis Time
  • 10s
MIL ON Condition
  • Not indicated (Only DTC memory)
scientia non olet · About LEMON Manuals