LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P2128-00: Accelerator Position Sensor 2 Signal Circuit-High Input >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect APS and ECM connector.
  3. Measure resistance between Pin No. 6 (APS.2 Signal) and Pin No. 4 (APS.1 Power) terminal of APS harness connector.
  4. Measure resistance between Pin No. 6 (APS.2 Signal) and Pin No. 5 (APS.2 Power) terminal of APS harness connector.

    Specification:  ∞ (infinite)Ω

  5. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals