LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P2128-00: Accelerator Position Sensor 2 Signal Circuit-High Input >> Wiring Inspection >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF" & disconnect the APS connector.
  2. Ignition "ON".
  3. Measure voltage between Pin No. 5 (APS.2 Power) terminal APS harness connector and chassis ground. (A)
  4. Measure voltage between Pin No. 5 (APS.2 Power) and Pin No. 1 (APS.2 Ground) terminal APS harness connector. (B)

    Specification:  "A" - "B" = Below 200mV

  5. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals