LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P2127-00: Accelerator Position Sensor 2 Signal Circuit Low Input >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF" & disconnect the APS connector.
  2. Ignition "ON".
  3. Measure voltage between Pin No. 6 (APS.2 Signal) terminal of APS harness connector and chassis ground.

    Specification:  Approx. 3.5V

  4. Ignition "OFF" & disconnect the ECM connector.
  5. Measure resistance between Pin No. 6 (APS.2 Signal) terminal APS harness connector and chassis ground.

    Specification:  ∞ (infinite)Ω

  6. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals