LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (5 Of 6) >> DTC P064A-00: Fuel Pump Control Module >> Wiring Inspection >> FPCM Power Circuit Inspection

FPCM Power Circuit Inspection

  1. Ignition "ON", engine "ON".
  2. Measure voltage between Pin No. 10 (Fuel Pump Relay 'ON' Input) terminal of FPCM harness connector and chassis ground.

    Specification:  Approx. 13.5V

  3. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals