LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Cadenza Limited >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program (Esp) System >> Troubleshooting >> ABS Does Not Operate >> Inspection Procedures >> DTC Inspection

DTC Inspection

  1. Connect the GDS with the data link connector and switch "ON" the ignition.
  2. Check that the DTC code is set off.
  3. Is the DTC code set off?

    NO 

    • Check the power source circuit.

    YES 

    • Erase the DTC and recheck using GDS.
scientia non olet · About LEMON Manuals