LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Occupant Classification System Diagnosis >> DTC B1764-00: OCS Mat Defect >> DTC Inspection >> Monitor KDS/GDS Data

Monitor KDS/GDS Data

  1. Ignition "OFF", connect KDS/GDS.
  2. Ignition "ON" & Engine "OFF", select "Current Data" mode.
  3. Monitor the "OCS Type2 Real-Time Status" "parameter on the KDS/GDS".
    Fig 1: Scantool Display - OCS Type 2 Real-Time Status
    G11936474Courtesy of KIA MOTORS AMERICA, INC.
  4. Has a problem been found?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in the part's and/or Passenger Weight Classification Sensor Mat & ECU connector or was repaired and Passenger Weight Classification Sensor Mat & ECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
scientia non olet · About LEMON Manuals