LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Windshield Wiper/Washer System >> Front Washer Motor >> Repair Procedures >> Washer Fluid Level Sensor Switch

Washer Fluid Level Sensor Switch

  1. Disconnect the negative (-) battery terminal.
  2. Drain the washer fluid less than 600 cc.
  3. Check for continuity between the No. 1 and No. 2 terminal in each float position.

    There should be continuity when the float is down.

    There should be no continuity when the float is up.

  4. If the continuity is not as specified, replace the washer fluid level switch
Fig 1: Washer Fluid Level Sensor Switch Connector
G11952793Courtesy of KIA MOTORS AMERICA, INC.
G11952794Courtesy of
scientia non olet · About LEMON Manuals