Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the air cleaner assembly.
(Refer to "AIR CLEANER .")
- Remove the battery and battery tray.
(Refer to "BATTERY .")
- Set shift lever to "N" position.
- Remove the control cable from the control shaft after remove the pin (A) and washer (B).
- Remove the control shaft assembly after loosen the bolts.
Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)