Removal And Installation

Remove the under cover.
Remove the oil drain plug, and drain the oil into a container.
Remove the oil pressure switch (A).
Tightening torque:

7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

Courtesy of
Install in the reverse order of removal
NOTE: When installing the oil pressure switch, apply seal lock to the thread.
Seal lock: THREEBOND 2403
Thickness: 0.2 ~ 0.4 mm (0.008 ~ 0.016 in)

Courtesy of