LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle Assembly >> Front Hub / Knuckle >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

  1. Remove the snap ring (A).
    G11953457Courtesy of
  2. Remove the hub assembly from the knuckle assembly.
    1. Install the front knuckle assembly (A) on press.
    2. Lay a suitable adapter (B) upon the hub assembly shaft.
    G11953458Courtesy of
  3. Remove the hub bearing inner race from the hub assembly.
    1. Install a suitable tool (A) for removing the hub bearing inner race on the hub assembly.
    2. Lay the hub assembly and tool (A) upon a suitable adapter (B).
    3. Lay a suitable adapter (C) upon the hub assembly shaft.
    4. Remove the hub bearing inner race (D) from the hub assembly by using press.
    G11953459Courtesy of
  4. Remove the hub bearing outer race from the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter (B).
    2. Lay a suitable adapter (C) upon the hub bearing outer race.
    3. Remove the hub bearing outer race from the knuckle assembly by using press.
    G11953460Courtesy of
  5. Replace hub bearing with a new one.
scientia non olet · About LEMON Manuals