LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw - Rate And G Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console.

    (Refer to "FLOOR CONSOLE .")

  5. Remove the rear heating joint duct (A).
    G11953934Courtesy of
  6. Pull up the lock of the SRSCM connector and disconnect the connector (A).
    G11953935Courtesy of
  7. Remove the SRSCM mounting bolts (3 EA) from the SRSCM, then remove the SRSCM.
G11953936Courtesy of
scientia non olet · About LEMON Manuals