LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> ABS Does Not Operate >> Inspection Procedures >> DTC Inspection >> Check The Power Source Circuit

Check The Power Source Circuit

  1. Disconnect the connector from the ESC control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 32 of the ESC control module harness side connector and body ground.

    Specification:  approximately B+

    Is the voltage within specification?

    YES 

    • Check the ground circuit.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ESC control module. Repair if necessary.
    G11953911Courtesy of
scientia non olet · About LEMON Manuals