Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Turn ignition switch OFF.
- Remove the air cleaner assembly.
(Refer to "AIR CLEANER .")
- Remove the battery.
(Refer to "BATTERY .")
- Disconnect the TCM connector (A).
- Remove the TCM (B) after removing the bolts and nut.
TCM installation bolt/nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)