Repair Procedure: Removal

Move the shift lever to "N" range.
Disconnect the battery negative (-) cable.
Remove the knob & boots (A) by pulling in the direction of arrow after removing the boots from the console upper cover.

Fig 1: Remove Boots From Console Upper Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly. (Refer to "REPAIR PROCEDURES "
Disconnect the main connector (A).

Fig 2: Remove Floor Console Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift cable (A) from the shift lever.

Fig 3: Remove Shift Cable Snap Pin
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (A).
Tightening Torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 4: Remove Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.