LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 3.3L >> Inhibitor Switch >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Place the shift lever into the "N" position.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).
    Fig 1: Disconnect Inhibitor Switch Connector
    G11872482Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the manual control lever (B) and the washer after removing a nut (A).
    Fig 2: Remove Manual Control Lever Nut
    G11872483Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the inhibitor switch (A) after loosening the bolts.
    Fig 3: Remove Inhibitor Switch
    G11872484Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals