Repair Procedures: Installation

Apply soapy water or tire lubrication to the top and bottom tire beads.

Fig 1: Apply Soapy Water Or Tire Lubrication To Top And Bottom Tire Beads
Courtesy of KIA MOTORS AMERICA, INC.
To fit the bottom bead, position the valve at the 5 o'clock position relative to the head on the tire changing machine.

Fig 2: Position Valve To Head On Tire Changing Machine
Courtesy of KIA MOTORS AMERICA, INC.
Place the tire on the rim so that the bottom bead touches the edge of the rim after the valve (at 6 o'clock). Rotate the rim clockwise, and push down on the tire at the 3 o'clock position to fit bottom bead.

Fig 3: Place Tire On Rim
Courtesy of KIA MOTORS AMERICA, INC.
After bottom bead is on tire, rotate the rim until the valve is at the 5 o'clock position relative to the head on the tire changing machine. Push down on the tire at the 3 o'clock position and rotate the rim clockwise to fit the top bead.

Fig 4: Rotate Rim Clockwise To Fit Top Bead
Courtesy of KIA MOTORS AMERICA, INC.
Inflate the tire until both beads seat.
Tire pressure: 235 - 242 (34 - 35)

Fig 5: Inflate Tire Until Both Beads Seat
Courtesy of KIA MOTORS AMERICA, INC.