Repair Procedures: Removal

1. Remove the valve body assembly.

   (Refer to Hydraulic System - "VALVE BODY ")

2. Disconnect the input & output speed sensor connector (A).
3. Remove the input & output speed sensor (B) after loosening the bolts.

Tightening Torque: 

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Locate Input And Output Speed Sensor Connector

Courtesy of KIA MOTORS AMERICA, INC.