LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento SX, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 3.3L >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

Ignition Coil (Cylinder #1) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 1: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 1 And Bank 1)
G11869424Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #2) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 2: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 2 And Bank 2)
G11869425Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #3) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 3: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 3 And Bank 1)
G11869426Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #4) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 4: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 4 And Bank 2)
G11869427Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #5) [Bank 1] 

  1. Remove the surge tank.

    (Refer to Engine Mechanical System - "SURGE TANK ")

  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 5: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 5 And Bank 1)
G11869428Courtesy of KIA MOTORS AMERICA, INC.

Ignition Coil (Cylinder #6) [Bank 2] 

  1. Turn the ignition switch off and disconnect the battery negative (-) Terminal.
  2. Disconnect the Ignition coil connector (A).
  3. Remove the ignition coil after loosening the mounting bolt (B).
Fig 6: Locate Ignition Coil Connector And Mounting Bolt (Cylinder 6 And Bank 2)
G11869429Courtesy of KIA MOTORS AMERICA, INC.
NOTE:
  • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Fig 7: Remove Ignition Coil Connector
G11869430Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals