LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento SX, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Information 

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).

    [Gasoline 2.0/2.4] 

    Fig 1: Locate Oil Filler Plug (Gasoline 2.0 / 2.4)
    G11862649Courtesy of KIA MOTORS AMERICA, INC.

    [Gasoline 3.3] 

    Fig 2: Locate Oil Filler Plug (Gasoline 3.3)
    G11862650Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the oil level.

    Information 

    Oil level must be up to fill the hole, if not, add oil until it runs over.

    Fig 3: Check Oil Level
    G11862651Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the oil filler plug with new gasket.

    Tightening Torque: 

    39.2~58.8N.m (4.0~6.0kgf.m, 28.9~43.4lb-ft)

  5. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")