LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (4WD Control System) >> 4WD Ecu >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learning with the GDS tool.

    (Refer to 4WD Control System - "REPAIR PROCEDURES ")

  2. Disconnect the battery negative cable from the battery
  3. Disconnect the 4WD ECU connector (A) and then loosen the nut (B).
    Fig 1: Locate 4WD ECU Connector And Nut
    G11862685Courtesy of ABLE BODY CORP.
  4. Remove the 4WD ECU.
scientia non olet · About LEMON Manuals