LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Engine Control System - 3.3L) >> Injector >> Repair Procedure >> Removal

Repair Procedure: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING: When removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, injury may be caused by leakage of high pressure fuel. For this reason, do not attempt any repairing immediately after engine stops.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Release the residual pressure in fuel line.

    (Refer to the "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Remove the delivery pipe & injector assembly.

    (Refer to "DELIVERY PIPE REMOVAL ")

  4. Remove the connector (A) and the fixing clip (B), and then separate the injector from the delivery pipe.
Fig 1: Locate Connector And Fixing Clip
G11872182Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals