LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedure >> Removal

Repair Procedure: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor from the intake manifold.
Fig 1: Locate Manifold Absolute Pressure Sensor Connector And Mounting Bolt
G11862179Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals