LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "Front Driveshaft ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ Joint ")

  3. Remove both sides of band (B) of the dynamic damper (A).
    Fig 1: Locate Band And Dynamic Damper
    G11863686Courtesy of KIA MOTORS AMERICA, INC.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fix Driveshaft With Vice
    G11863687Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply soap powder on the shaft to prevent damaging between the shaft spline and the dynamic damper when removing the dynamic damper.
  6. Seperate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Locate Dynamic Damper And Shaft
G11863688Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals