LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent damaging between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST (09495-3K000), secure the TJ boot bands (B).

    Clearance (A):  2.0 mm (0.0787 in.) or less

    Fig 1: Locate TJ Boot Bands And Dynamic Damper Band
    G11863689Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ Joint ")

  6. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "Front Driveshaft ")

scientia non olet · About LEMON Manuals