LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Rail Pressure Sensor (RPS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Remove the intake manifold.

    (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

  4. Remove the delivery pipe foam (A).
    Fig 1: Locate Delivery Pipe Foam
    G11862227Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
Fig 2: Locate Rail Pressure Sensor Connector
G11862228Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals