LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Knock Sensor (KS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the intake manifold.

    (Refer to Engine Mechanical System - "INTAKE MANIFOLD ").

  3. Disconnect the injector connector (A).
  4. Remove the mounting bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Locate Injector Connector And Mounting Bolt
G11862214Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals