LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Locate Engine Coolant Temperature Sensor Connector
    G11862192Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the spring clip (A), and then pull the sensor from the water temperature control assembly.
    Fig 2: Locate Spring Clip
    G11862193Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Note that engine coolant may flow out of the water temperature control assembly when removing the sensor.
scientia non olet · About LEMON Manuals