LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> ETC (Electronic Throttle Control) System >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the resonator and the air intake hose.

    (Refer to appropriate service information.

  3. Remove the intercooler inlet pipe & hose assembly (A).
    Fig 1: Locate Intercooler Inlet Pipe And Hose Assembly
    G11862169Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the ETC module connector (A).
  5. Disconnect the coolant hoses (B).
  6. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 2: Locate ETC Module Connector, Coolant Hoses And Bolts
G11862170Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals