LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sorento EX, 2.0L Eng VIN 1, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Barometric Pressure Sensor (BPS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).
    Fig 1: Locate Air Duct
    G11862182Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the bar connector (A).
  4. Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.
Fig 2: Locate Bar Connector And Mounting Bolt
G11862183Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals