Monitor GDS Data

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Ignition OFF and Connect GDS to Data Link Connector (DLC).
Ignition "ON" & Engine "OFF".
Select "Diagnostic Trouble Codes (DTC)" mode and monitor "DTC Status" parameter.
Is the DTC present?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- This code is set for a second because of a poor connect of Head unit connector or did not clear the DTC.
  Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.