LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Front Door Assembly) >> Front Door Outside Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hole plug (B).
  2. After loosening the mounting bolt, then remove the front door outside handle cover (A).

    Tightening Torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Loosening Front Door Outside Handle Cover Mounting Bolt
    G11801073Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the front door outside handle (A) by sliding it rearward.
    Fig 2: Removing Front Door Outside Handle
    G11801074Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the front door outside handle connector (A).
    Fig 3: Locating Front Door Outside Handle Connector
    G11801075Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.

    Information 

    • Make sure the connector is connected properly.
    • Make sure the door locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals