Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door module.
(Proceed to Front Door - "FRONT DOOR MODULE ")
Remove the front door latch wiring harness (A) from the top of the door latch assembly.

Fig 1: Locating Front Door Latch Wiring Harness
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.

Fig 2: Pushing Front Door Outside Handle Base Lock Pins
Courtesy of KIA MOTORS AMERICA, INC.
To remove the front door outside handle base connector (A), widen both sides of the lock pins in the direction of the arrow and then push back the front door outside handle base connector.

Fig 3: Pushing Front Door Outside Handle Base Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle cable (A).

Fig 4: Locating Front Door Outside Handle Cable
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the front door latch mounting bolts (A).

Fig 5: Loosening Front Door Latch Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the front door latch connector (B).
Remove the front door latch assembly (A) by pulling it in the direction of the arrow.

Fig 6: Removing Front Door Latch Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door inside handle cable (A) by pushing it rearward.

Fig 7: Removing Front Door Inside Handle Cable
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Make sure the door locks/unlocks and opens/closes properly.
- Replace any damaged clips.