LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Front Door Assembly) >> Front Door Inside Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim.

    (Proceed to Front Door - "FRONT DOOR TRIM ")

  2. Disconnect the front door inside handle lamp connector (A).
  3. After loosening the mounting screws, then remove the front door inside handle (B).
    Fig 1: Loosening Front Door Inside Handle Mounting Screws
    G11801062Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.

    Information 

    • Make sure the connector is connected properly.
    • Make sure the door locks/unlocks and opens/closes properly.
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals