LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Automatic Transaxle System Diagnosis) >> DTC P0601: Internal Control Module Memory Check Sum Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault is corrected.

  1. After connecting GDS select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear recorded DTC using GDS.
  3. Drive the vehicle within DTC "Enable conditions" in "General information".
  4. After selecting "Diagnostic Trouble Codes (DTC)" mode and check if DTC is recorded again.
  5. Are any DTCs recorded?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is operating to specification at this time.
scientia non olet · About LEMON Manuals