LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Multi Function Switch Diagnosis) >> DTC B1602-00: CAN Line Error (B-CAN) >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and Select "Diagnostic Trouble  Codes (DTC)" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in GENERAL INFORMATION .
  3. Is any DTC set again?

    YES 

    • Go to the applicable troubleshooting DTC INDEX procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals