LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Smart Cruise Control Diagnosis) >> DTC C1632: Cluster Control Switch Fail >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "DTC" button.
  2. Press "DTC Status" button and confirm that "DTC Readiness Flag" indicates "Completed". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions in this procedure.
  3. Read "DTC Status" parameter.
  4. Is parameter "History (Not Present)" displayed?

    YES 

    • System performing to specification at this time. Clear the DTC.

    NO 

    • Go to the applicable troubleshooting DTC INDEX procedure.
scientia non olet · About LEMON Manuals