LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Air Conditioning System) >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Proceed to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the evaporator temperature sensor connector.
  4. Remove the evaporator temperature sensor (A) by pulling it out after rotating it 90° in a counterclockwise direction.
    Fig 1: Removing Evaporator Temperature Sensor
    G11804251Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals