LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Air Conditioning System) >> AC Pressure Transducer >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Recover the refrigerant with a recovery/charging station.
  3. Disconnect the suction hose (B) after loosening the nut (A).
    Fig 1: Disconnecting Suction Hose Nut
    G11804245Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the A/C pressure transducer connector (A).
    Fig 2: Disconnecting A/C Pressure Transducer Connector
    G11804246Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the A/C pressure transducer (A).

    Tightening torque: 

    10 ~ 12 N.m (1.02 ~ 1.22 kgf.m, 7.4 ~ 8.8 lb-ft)

    Fig 3: Removing A/C Pressure Transducer
    G11804247Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Be careful not to bend the liquid & suction pipe.
  6. Install in the reverse order of removal.
    NOTE: When installing, replace it with a new O-ring (A).
    Fig 4: Locating O-Ring
    G11804248Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals