Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel and tire (A) from front hub.
Tightening Torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
CAUTION:
- Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Fig 1: Removing Front Wheel And Tire From Front Hub
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front assembly.
(Proceed to Front Suspension System - "FRONT STRUT ASSEMBLY ")
Disconnect the front upper arm (A) with the front strut assembly bracket (B) by loosening the bolt.
Tightening Torque:

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Fig 2: Disconnecting Front Upper Arm With Front Strut Assembly Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
CAUTION:
- Keep mind in upper arm installing angle.
Check the alignment.
(Proceed to Tires/Wheels - "ALIGNMENT ")